repairing alot of faults with multimeter

http://ift.tt/1QLSuDr this link will allow you to work out what the standard resistance in cable as per thickness and length.
http://ift.tt/1QLSuDt this link shows how to measure resistances. with these two bits of science that proves resistance tells all you should be able to work out most faults by, measuring the resistance via cables to component, bearing in mind if no resistance and no completed circuit then wire is broken. also wire might be only holding on one strand if so the difference in resistance check on cable via above link will give you a idea, high resistance will lower the voltage.. all components have a cold resistance ie not plug in.

This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.

repairing alot of faults with multimeter