MyTractorForum.com - The Friendliest Tractor Forum and Best Place for Tractor Information
Elec-Trak-E-15-Garden-Tractor On E-Bay
Sleeve hitch and cart recommendations?
Hi all, I want to get a solid sleeve hitch and cart for my husqvarna ts348d garden tractor. Something I can move a bunch of pavers, brick, firewood and horsemanure with.
Thanks
Thanks
JD L120 22hp runs but no power
Hi all, I just received a John Deere L120 with the Briggs 22hp engine. I got it for free and it has just over 500 hours on it. The mower runs but it just doesn't have any power. I changed the plugs on it and it seemed to help a bit but it's still lacking a lot of power. When you engage the blades, it just about dies but will stay running. Haven't had a lot of time to look at it and not really in a hurry but just trying to get some ideas on where to start to get this engine running good again. Thanks
Model: 407777
Type: 0131 E1
Model: 407777
Type: 0131 E1
XT3 GSX Deck Steel Gauge
I'm looking at getting the new XT3 GSX and wanting the 54 or 60" mower deck. I have been unable to find any information on the steel gauge on the stamped deck or on the fabricated deck. Can anyone help with the deck steel gauge.
The reason is because my lawn is 5 to 6 acres of mowing and the grass is some tough Bahia grass. Although it may look good it is tough grass. On my old 54" deck the mower blades are totally eat up in 28 hours of mowing, totally worn out with the blade wing scoops even worn off. Now after 8 yrs even the deck is being eaten up which is my reason for wanting to buy the new mower with at least a 10 gauge deck. So hope someone can help. Thanks in advance.
The reason is because my lawn is 5 to 6 acres of mowing and the grass is some tough Bahia grass. Although it may look good it is tough grass. On my old 54" deck the mower blades are totally eat up in 28 hours of mowing, totally worn out with the blade wing scoops even worn off. Now after 8 yrs even the deck is being eaten up which is my reason for wanting to buy the new mower with at least a 10 gauge deck. So hope someone can help. Thanks in advance.
toolman55
hello all - just bought a craftsman yt3000 - seems like a great place to be for help with this.
Caption This! 9-24-18
:tango_face_surprise :tango_face_surprise :tango_face_surprise :tango_face_surprise
Attached Thumbnails
Simplicity 717
posted long ago but I have a 717 with blown motor, non repairable, rod wanted to see sunlight,
. Any one happen to have a motor for it or are interested in it? IT IS THE 2 SPEED transfer case and it works.:tango_face_angel::tango_face_smile::tango_f ace_smile::tango_face_smile:
. Any one happen to have a motor for it or are interested in it? IT IS THE 2 SPEED transfer case and it works.:tango_face_angel::tango_face_smile::tango_f ace_smile::tango_face_smile:
New Member
I have an early 80's model 550 backhoe. Looks like I am going to need some help. Winters are cold in Alaska and I think it is going to snow soon. I'd like to get this tractor moving again. I'm just a simple homeowner with a couple pieces of equipment. I love to move the dirt around on this 10 acres in the hills. I'm very attached to my TD7 and the 550 hoe. Don't how most folks get along without. Looking forward to getting familiar with this site.
First Deere project Tractor (445)
G'Day all,
So, after moving across the country to a new home in Nova Scotia I figured a tractor for my 2 acres was in order. Did quite a bit of searching and received some excellent advice from Sarge (Sergeant) here on the forums.
A bit of background... two acre property, flat with a few larger obstacles and no hills... snowblowing is handled by an 30" Ariens blower. Whatever tractor I found was basically going to live the life of Rielly… cutting the lawn, hauling a little trailer around.. all light duty work. Sarge recommended a GX345 that I had located but I wasn't able to put a deal together due to shipping costs.
Sooo…. a couple months down the road, I'm at a John Deere Dealer and come across a 445. 1600 hours, and owned by a landscaper who clearly "rode it hard and put it away wet". The dealer received it on trade for a new X5** series. In a fit of what may be a bad decision, I bought it for $700 and drove away. She's in rough shape... temp gauge isn't working, there's a fuel smell when running, various body panels are broken, grease and dirt everywhere... the 48" deck has seen much better days as well... bent, bad welds, missing anti-scalp wheels.... oh god, what have I gotten myself into... :tango_face_wink:
For what its worth, here she is....
Attachment 2336825
Attachment 2336827
Attachment 2336829
So, after moving across the country to a new home in Nova Scotia I figured a tractor for my 2 acres was in order. Did quite a bit of searching and received some excellent advice from Sarge (Sergeant) here on the forums.
A bit of background... two acre property, flat with a few larger obstacles and no hills... snowblowing is handled by an 30" Ariens blower. Whatever tractor I found was basically going to live the life of Rielly… cutting the lawn, hauling a little trailer around.. all light duty work. Sarge recommended a GX345 that I had located but I wasn't able to put a deal together due to shipping costs.
Sooo…. a couple months down the road, I'm at a John Deere Dealer and come across a 445. 1600 hours, and owned by a landscaper who clearly "rode it hard and put it away wet". The dealer received it on trade for a new X5** series. In a fit of what may be a bad decision, I bought it for $700 and drove away. She's in rough shape... temp gauge isn't working, there's a fuel smell when running, various body panels are broken, grease and dirt everywhere... the 48" deck has seen much better days as well... bent, bad welds, missing anti-scalp wheels.... oh god, what have I gotten myself into... :tango_face_wink:
For what its worth, here she is....
Attachment 2336825
Attachment 2336827
Attachment 2336829
Attached Thumbnails
Aucun commentaire:
Enregistrer un commentaire