Hello all, my Kangoo 1.5 Dci runs albeit lumpy and only 621 rpm I have plugged Bosch kit in but cannot see a problem when reading the following as i cant find the Delphi figures. rail pressure, actual 29.8 MPa
rail pressure nominal 30.9MPa fuel pressure regulation 1.2v injected fuel quantity 10.2mg air mass actual 387mg intake manifold pressure 984 mbar atmospheric pressure 1005 mbar IAT sensor 1.9v idle speed 622 1/min target 828 1/min idle increase solonoid valve is OFF Accel pedal voltage changes when activated.
rail pressure nominal 30.9MPa fuel pressure regulation 1.2v injected fuel quantity 10.2mg air mass actual 387mg intake manifold pressure 984 mbar atmospheric pressure 1005 mbar IAT sensor 1.9v idle speed 622 1/min target 828 1/min idle increase solonoid valve is OFF Accel pedal voltage changes when activated.
any ideas people?
Post Moved Please do not ask Tech Questions in the Welcome area
Last edited by Nottnoc; 40 Minutes Ago at 09:57 PM. Reason: Advice
This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.
Kangoo 1.5Dci runs but wont rev up
Aucun commentaire:
Enregistrer un commentaire