jeudi 18 février 2016

clio 1.5dci 106 alternator and UPC relay identification

Hi.
i have a clio mk3 1.5dci 106 and recently i got the battery warning light - and stop light on my dash. i have checked the voltage from the alternator and i am only getting 12.2volts (at idle and 2500/3000revs). i have had my battery checked - and this is fine - fully charged = 12.7volts. The alternator has 2 wires. The main red one - going to battery, and another - single core (white cable) that plugs into the side of the alternator. if i remove this plug the battery waring light goes out - however the charge (or lack of!) does not change. I have measured 8.3volts on the plug connector.
i know its looking like my alternator is not working, but ive read it is controlled by a relay in the UPC box. i have tested all fuses in there - and all are ok. i have 8 relays - (space for 9). does anyone know which relay controls what? Please see attached pic i found of my upc with the relays.
Also do people agree it looks like the alternator is broke?....only ive been quoted £700+ to replace ....any other advice would be most welcomed.
i think it is a 150amp alternator.

Last edited by hondo; 1 Hour Ago at 02:55 PM. Reason: Potential copy protected image removed

This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at http://ift.tt/jcXqJW.



clio 1.5dci 106 alternator and UPC relay identification

Aucun commentaire:

Enregistrer un commentaire